XL Series Circuit Analyzer Specifications
|
|
TESTS
|
|
|
Standard:
|
Scans the assembly for continuity and shorts.
|
|
Resistance:
|
1 kOhm to 50 kOhm (with Standard Test Board)
|
|
Capacitance:
|
Capable of testing Capacitors between 0.1µF to 470µF
|
|
Diode:
|
Capable of verifying correct anode/cathode orientation.
|
|
Special Test:
|
Analyzer test points can be used to initiate a "black box" test. Analyzer then scans for return results on one or more test points as programmed.
|
|
Unused Pins:
|
Prevents extra circuits from being installed on multilevel build fixtures.
|
|
Buss Bars:
|
PASSŪ software allows input of bussed contacts.
|
|
Detection Switches:
|
Accommodates special fixture detection switches, which may be tested opened or closed to insure fixture integrity.
|
|
|
|
BASIC FEATURES
|
|
|
Data Logging:
|
Battery backed-up memory stores error data. Data may be uploaded to a PC for further analysis via an RS-232C serial port.
|
|
Program Storage:
|
Battery backed-up memory retains up to 32 programs.
|
|
Detailed Errors:
|
Errors are displayed using names chosen by the programmer for clarity.
|
|
Communications:
|
Two RS-232C ports allow for printing, program downloading, networking and data retrieval.
|
|
External Devices:
|
The Analyzer Control Port contains 8 open collector drivers, handling up to 0.5 A at 24 VDC each, to control external devices. The Control Port can also control accessories capable of providing up to an additional 1024 open collector drivers.
|
|
Audible Tones:
|
A variety of user programmable tones for error notification and special events.
|
|
|
|
PROGRAM
|
|
|
Generation:
|
PC compatible PASSŪ software observes most standard industry practices to generate test program. PASSŪ allows full utilization of all analyzer capabilities. Test programs can also be created using a known good harness.
|
|
Loading:
|
Programs are transferred to the Analyzer from a DynaCard II program cartridge or downloaded from a PC using an RS-232C serial port.
|
|
|
|
SPECIFICATIONS
|
|
|
|
256XL
|
1024XL
|
1536XL
|
2048XL
|
|
Test Point Capacity
|
128 - 256
bi-directional
|
128 - 1024
bi-directional
|
128 - 1536
bi-directional
|
128 - 2048
bi-directional
|
Dimensions
(W x D x H)
|
11.2" x 7.3" x 3.75"284mm x 186mm x 95mm
|
11.2" x 7.3" x 6.5"284mm x 186mm x 165mm
|
11.2" x 7.3" x 8.5"284mm x 186mm x 216mm
|
11.2" x 7.3" x 10.5" 284mm x 186mm x 267mm
|
|
Weight:
|
8 lbs (3.6 kg)
|
12 lbs. (5.5 kg)
|
15 lbs (6.8kg)
|
19 lbs (8.6kg)
|
|
Input Power
|
Standard 90-260 VAC, 50-60 Hz, 30 W
|
|
Test Point Interface:
|
64 pin card edge connectors (or equivalent)
Ribbon: AMP# 1-11110-1
Discrete: AMP# 2-583718-7
|
| Sensitivity:
|
Programmable by altering test voltage, threshold, and constant current load
|
|
Operating Speed
|
Scans up to 10,000 points per second
|
|
Test Voltage
|
Range: 2-12 VDC Resolution: 50mV
|
|
Thresholds
|
Range: 0-10 VDC Resolution: 40 mV
|
|
Constant Currents
|
Range: 0-6 mA Resolution: 40 µA
|
|
Dwell Time
|
Range: 0.1 ms - 1.0 s Resolution: 0.1 ms
|
|
|
|
|
For more information on the XL Series analyzers please visit the XL Series Overview page and the individual pages for the Model 256XL, Model 1024XL, Model 1536XL and the Model 2048XL.
|
Home ·
Products ·
Support ·
NX Series
© 2004 Dynalab All rights reserved.
|
