MTA Header Interface (Low Voltage)
 
To aid test fixture building and maintenance, Dynalab offers test point distribution solutions. Ribbon cables neatly deliver test points from the NX Tester to MTA Header Interfaces.

MTA (Mass Termination Assembly) are a series of TE Connectivity (Tyco) headers and connectors. MTA Connectors are attached to the MTA Header Interface with MTA Connectors of various sizes. Should a fixture block require maintenance, it can be quickly disconencted and replaced.



  MTA Header Interface
 
The MTA Header Interface allows the user to distribute 64 test points away from the NX Tester and provide an easy connector interface. These devices are connected to the NX Tester using the Ribbon Cable Interface Assemblies. Requires below ribbon cable interfaces.
 
5-2198 MTA Header Interface


  Ribbon Interface Cable
 
The Ribbon Interface Cable is offered for specialized applications where a Dynalab NX Tester must be connected to a printed circuit board or any device containing a dual row header (0.100" spacing). This cable is available in three lengths.
 
5-2102 Ribbon Interface Cable, 2'
5-2104 Ribbon Interface Cable, 4'
5-2108 Ribbon Interface Cable, 8'


  MTA Connectors
 
MTA connectors come in multiple sizes and Dynalab offers a few of the common sizes. These and other sizes can also be purchased from your local TE Connectivity distributor.
 
5-2402 MTA Connector, 2 position (TE# 3-640441-2)
5-2404 MTA Connector, 4 position (TE# 3-640441-4)
5-2406 MTA Connector, 6 position (TE# 3-640441-6)
5-2408 MTA Connector, 8 position (TE# 3-640441-8)
5-2410 MTA Connector, 10 position (TE# 4-640441-0)


  MTA Tooling
 
A MTA crimping tool is required to attached wires to the MTA connectors.
 
5-2498 MTA Crimping Tool (TE# 58074-1 and 58246-1)
5-2499 MTA Maintenance Tool (TE# 59803-1)

 

 




   

 Ribbon Interface Cable
 
The Ribbon Interface Cable is used to connect the MTA Header Interface to the NX Tester.
 
5-2102 Ribbon Interface Cable, 2'
5-2104 Ribbon Interface Cable, 4'
5-2108 Ribbon Interface Cable, 8'



  Ribbon Cable Components
 
To create custom ribbon cables, Dynalab offers 64 conductor ribbon cable and the two ribbon cable connectors.
 
     
5-2192 Card Edge Connector      
5-2193 Dual Row Header Connector      
5-2194 64 Conductor Ribbon Cable (100 foot lengths)