NX System Upgrades

Dynalab strives to provide each of our customers with the best possible products and support services. We believe that our continued success will be a result of listening to our customers' needs and building the best possible products to meet those needs. This is the principle that drives us to continuously work on the development of Your Dynalab Products, even after you have purchased them.

The link below will provide you with everything you need to upgrade your NX System to the latest version available. To be able to take full advantage of the new features, it is necessary that you update your PC (with the latest version of the NX Editor) as well as your NX Testers (with the latest version of the NX Firmware) - Failure to update one of the two might result in incompatibility issues causing undesirable results.

Downloading Instructions:

1. Click on the link below
2. When prompted, select "Save" - select the location on your computer where you wish to save the file
3. Once the download is completed, select "Open" to open the compressed .zip file
4. Open the document titled "NX System Upgrade Procedure" and follow the instructions to upgrade your NX System.
5. Before updating your NX Testers, please make sure that all programs are backed up, since all existing programs will be lost. After completing the upgrade, programs must be manually restored to the NX Testers.

Release	Date	Components	Description
NX_Release_10.zip (21 MB)	07/2008	NX Editor 1.0.10.154 NX Tester 2.10.126	Thermistor Testing (New Component) NX Editor Password Security Hexadecimal Representation of Counter Variable and more...
NX_Release_9_1.zip (21 MB)	06/2008	NX Editor 1.0.9.147 NX Tester 2.9.124	NX Hipot Testers support New Workflow timer function and more...
NX_Release_8.zip (17 MB)	07/2007	NX Editor 1.0.8.130 NX Tester 2.8.114	New part number view Multiple part number option code support Read and Write workflow enhancements Substring function for automatic program selection and more...
NX_Release_7_1.zip (10 MB)	01/2007	NX Editor 1.0.7.119 NX Tester 2.1.107	Delete file on end mode Enhanced Write Workflow Item Limited Shorts Scan Option Copy/paste connections/components views Important bug fixes and more...
NX_Release_7.zip (10 MB)	10/2006	NX Editor 1.0.7.111 NX Tester 2.1.103	NX Server Enterprise Edition support Calibration Verification Device support Probe function is now active during testing Dual Control Port Module support Enhanced Autolearn functions and more...
NX_Release_6-1.zip (7.96 MB)	04/2006	NX Editor 1.0.6.94 NX Tester 2.0.89	The NX Testers can now copy the contents of the system log to the memory card. A bug, that was causing unnecessary re-testing of the wire harness whenever a short error was encountered, has been fixed.
NX_Release_6.zip (7.96 MB)	02/2006	NX Editor 1.0.6.94 NX Tester 2.0.82	NX Testers can now illuminate LEDs on test fixtures equipped with LEDs on fixture blocks. NX Testers now support virtually any serial label printer. NX Testers now support multiple testers on a rotary line communicating over a wireless network with a single print server. and more...
NX_Release_5.zip (7.58 MB)	10/2005	NX Editor 1.0.5.84 NX Tester 2.0.77	NX Testers are now fully networkable. The NX Key Programmer, is now available to program Operator and Supervisor Keys. A new import file specification, CAP-H™, is now supported for importing wire harness data into a NX Editor program via the File Import Wizard. The Probe mode now can display the wire name and wire color associated with the probed point. and more...
NX_Release_4.zip (2.51 MB)	04/2005	NX Editor 1.0.5.77 NX Tester 2.0.67	The NX Testers can now provide a report of a completed wire harness test. The NX Testers are now capable of learning from a known-good wire harness. Enhanced Component Testing (Diode and Generic). Data can now be imported from an external file, a PASS program, or another NX program. and more...
NX_Release_3.zip (1.89 MB)	10/2004	NX Editor 1.0.4.66 NX Tester 1.4.58	Added functionality to support automatic program selection using a bar code scanner (serial port 2) Added support for serial ports 3 and 4 Added serial ports hardware handshaking Added support for 2-line Extended Display Capacitor Testing Extended Resistor Testing Range (Up to 2Meg Ohms)
NX_Release_2.zip (1.86 MB)	8/2004	NX Editor 1.0.3.62 NX Tester 1.4.50	The Flow Arrow properties have been removed. The properties that had previously been associated with the Flow Arrows are now available in the new User Interface (UI) workflow item