Dynalab Test Systems - Pro + / Expansion Wire Harness Testing Equipment, Cable Testers, Continuity Test Equipment

80 character, 4 line vacuum fluorescent display display
Simple 4-button user interface
Testing for continuity, shorts, diodes, resistors, capacitors
High speed shorts testing
Precision resistance measurements
Continuous high speed scanning for real time complete status information of harness assembly progress
Keyed security access and control
Built for rough industrial environments
2 serial ports for connection to printers and scanners
Standalone operation
Uses a high capacity memory card
Expandable architecture - tests up to 32,768 test points

NX Pro+ Tester

The Dynalab NX Pro+ Tester is modular and is designed for applications requiring up to 32,768 test points. It has the same "front end" as the NX Pro Tester, but employs a series of Expansion Units to accommodate the test point cards. Each expansion unit is supplied with a 2' and a 6' ribbon cable to connect to the NX Pro Tester - either cable can be used depending on your set up needs; and 1 NX Terminator. Each Expansion Unit can contain up to 8 test point cards for 1024 test points. A maximum of 32 Expansion Units may be connected for 32,768 test points.

The flexibility of the NX System allows each program to perform multiple tests, display custom messages or sounds, and analyze the results of a test or an input to "decide" which operation to perform next. The NX Pro+ Tester has 1.3Mb memory capacity for program storage and is compatible with Printers, Scanners, and all other Dynalab NX System accessories. - NX Testers Specifications

3-00640-0	NX Pro+ Tester with 640 Test Points
3-00768-0	NX Pro+ Tester with 768 Test Points
3-00896-0	NX Pro+ Tester with 896 Test Points
3-01024-0	NX Pro+ Tester with 1024 Test Points
3-01152-0	NX Pro+ Tester with 1152 Test Points
3-01280-0	NX Pro+ Tester with 1280 Test Points
3-01408-0	NX Pro+ Tester with 1408 Test Points
3-01536-0	NX Pro+ Tester with 1536 Test Points
3-01664-0	NX Pro+ Tester with 1664 Test Points
3-01792-0	NX Pro+ Tester with 1792 Test Points
3-01920-0	NX Pro+ Tester with 1920 Test Points
3-02048-0	NX Pro+ Tester with 2048 Test Points

Contact Dynalab for configurations above 2048 test points.

Communications Board Option - any of the testers shown above may be ordered with a factory installed Communications Board. To order this option, replace the last digit of the part number with 1 (i.e. 3-02048-1). Click here for more information about the Communications Board.

Field Upgrade Options
Test Point Boards
Expansion Unit