| Connections |
Continuity: 1-100 ohms: +/- 1 ohm,
100 ohms - 500K ohms: +/- 1%,
500K ohms - 2M ohms: +/- 5%
Shorts: 1Kohm - 2Mohms (± 20%) |
| Components |
Diodes: Checks for proper orientation
Resistors: 1-100 ohms: +/- 1 ohm, 100 ohms - 500K ohms: +/-
1%,
500K ohms - 2M ohms: +/- 5%
Capacitors: 100pF to 500uF (± 5% to 20% based on capacitor type, ±10pF)
Contact Dynalab for exact specification per capacitor type |
| Relay Testing |
Capable of active relay testing |
| Test Voltage |
Test voltage is automatically selected by the NX Tester. The
maximum voltage is 14VDC |
| Test Current |
Test current is automatically selected by the NX Tester. The
maximum current is 5mA DC |
| Test Speed |
1 seconds per 1024 test points (continuity only)
3 seconds per 1024 test points (continuity and shorts) |
| Display |
Errors are displayed using connector names, wire names, and wire
color on a 4-line x 20 character display. |
| Audible Tones |
Provides a variety of user programmable tones for error notification
and special events. |
| Program Storage |
1.3Mb of capacity with no file quantity limitation. |
| Control Port |
One control port accommodates the optional Control Port Module
to control a single device. Optional Multiport Unit is available to allow control
for up to 24 devices through a serial port. |
| Serial Ports |
Two RS-232 ports are standard, and two additional RS-232 ports
are optionally available to connect to printer, bar code scanner, extended display,
or multiport unit. |
| Test Point Interface |
64 pin card edge connector |
| Input Power |
Uses external power supply rated for 100 – 240VAC, 50-60Hz,
30W max. Power supply provides 15VDC to the NX Tester. |
| Test Point Capacity |
NX Solo: 128 - 256 test points
NX Pro: 128 - 512 test points
NX Pro+: 128 - 32768 test points |
| Size (W x D x H) |
NX Solo 10.7” x 7.5” x 2.8”
(27.2 cm x 19 cm x 7.1cm)
NX Pro: 10.7” x 7.5” x 4” (27.2cm x 19 cm
x 9.7cm)
NX Expansion Unit: 9.5” x 6.4” x 6.3” (24.2cm
x 16.3cm x 16 cm) |
| Weight |
NX Solo: 5.1 lbs (2.3 Kg)
NX Pro: 6.6 lbs (3 Kg)
NX Expansion Unit:8.0 lbs (3.6 Kg) |
| Operating Temperature |
40 – 100 degrees F (4 – 38 degrees Celsius) |
| Warranty |
One year parts and labor |
| Certifications |
CE Certified |
